Services
With over 25 years experience working with concrete there is not much we haven’t worked on. Some of the areas we have expertise in are shown here.
Residential
– Slabs
– Foundations
– Driveways
– Landscaping
– Formed Walls
– Structural Elements
– Decorative concrete
Pools
– Pool Decks
– Pool Coping
– Pool area stairs
– Pool Paths
– Garden edging
– Surface water management
Decorative Concrete
On the Central Coast we are widely regarded as one of the leaders in decorative concrete. We offer the three traditional methods of taking boring plain old concrete and turning it into something more. The three methods are Stamped Concrete, Stencilled Concrete and Sprayed on Concrete .
Which one to choose? The finishes achieved are suitable for most applications, they are very durable- all have a top quality concrete sealer applied as the last step and need little maintenance. It is really up to your taste and which look suits the style of your home.
Central Coast Concrete Sealing
We live in a harsh coastal environment on the Central Coast and although concrete is a hard material over time it will wear and look old. You can protect your paths, driveway, patio or garage slab by sealing it with different products.
Epoxy concrete sealers or poly urethane finishes are two options to keep concrete looking new or to rejuvenate an old install or to change the look to match updates to the rest of your property.
Stencil Concrete
1. The concrete is poured to a minimum thickness of 100mm. a paper stencil is laid on top of the concrete.
2. Quality colour hardener is then applied to the surface of the concrete and trowelled in.
3. After the concrete has been left to dry sufficiently, the paper stencil is removed to reveal the pattern. Control joints are then cut into the concrete.
4. Finally a sealer is applied to protect the surface from staining and to give you a durable finish.
Spray-on Concrete
1.Clean and prepare the existing concrete and cover any cracks and imperfections.
2.Apply basecoat before laying the stencil.
3. Lay the stencil on top of the basecoat and proceed top add the topcoat of chosen colours. Remove the stencil.
4.Finally, Clean and proceed to seal the the job.
Stamped Concrete
1. The concrete is poured to a minimum thickness of 100mm. Quality colour hardener is then applied and trowelled in.
2. Release agent is then applied prior to stamping the surface with the stamp mats.
3. After the concrete has been left to dry sufficiently the surface is cleaned preparing for sealer.
4. Finally, a sealer is applied to protect the surface from staining and to give you an attractive and durable finish. Anti-slip may be added at this time if required.
